Our machine, in addition to excellent balance, has the ability to work both on a cord and on batteries included in the kit.
Video review: https://www.youtube.com/watch?v=T83OBWEIi-o (russian language)
1.
Basic parameters:
Input voltage - 5V
Output voltage - 3-12V 1A
Power: 1-12W.
Size: 23 x 135.4 mm.
Stroke: 3mm.
Weight: 116g.
Battery capacity: 900MA
Charging time: 2 hours.
Working time: 2-4 hours in normal mode.
Recommended voltage: 6-8V.
Included: 2 battery heads, 1 machine, 1 head for RCA connection, charging cable with type-c connector.
2.
Note: Please use a phone charger or similar devices.
The manufacturer is not responsible for any problems caused by using another charger.
The screen may not show anything if the machine is not used for a long time,
please restart the machine after charging for 5 hours.
3.
On/off - long press.
Start/pause - short press.
Change interface - sequential press
(M1 - normal mode, M2 - intermittent mode, M3 - "gradient" mode, P - "point" mode)
Volt and frequency adjustment: short press + - step-by-step acceleration. Long press - faster speed adjustment.
Battery percentage: readings in the upper left corner of the display. The icon will start flashing when the charge is below 10%.
Charging: the battery icon and progress indicator will be displayed during charging.
4. M1 - Normal mode. The needle moves evenly up and down at a constant set speed.
M2 - Intermittent mode. The needle moves at a constant set speed. 2 seconds of work - pause.
Will help a beginner to better practice the technique of shading.
M3 - "Gradient" mode. The needle moves at a variable speed from higher to lower with a pause.
Will help a beginner to practice the technique of gradient color stretching.
P9 - Dot mode. The machine makes single punctures at a set speed.
Will be useful in the procedure of trichopigmentation or when fine point work is needed.
